Your cart is currently empty
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds.
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds.
IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces.
FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams.
FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins.
Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
Replacement top that is on all of BSI's non-Pocket CAs.
For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time.
Two foot length of tubing can be cut off to any length (usually 2").