Screws, 3x18mm button-head machine (hex drive) (6)

Screws, 3x20mm button-head machine (hex drive) (6)

Screws, 3x10mm button-head machine (hex drive) (6)

Traxxas 2443 - 36mm Camber Link Turnbuckle Set (2)

Gear, 24-T pinion (48-pitch) / set screw

Traxxas 2419 - Pinion Gear with Set Screw - 19T, 48P

Gear, 16-T pinion (48-pitch) / set screw

Y-harness, BEC

Traxxas 2082 - Gear Set for 2080 Micro Waterproof Servo

Servo, digital high-torque (ball bearing), waterproof

Traxxas 2056 - High Torque Waterproof Servo

Traxxas 1952 - Rear Stub Axle Carriers (2)

Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

RC crawling is easier and more affordable than ever with the ready-to-run Axial SCX30 Chevrolet K10 4X4. With its scale ABS hard body, high-performance chassis, and Spektrum electronics, this 1/30 scale rig delivers big on realism and capabilities.

Built on the sub-micro Axial SCX30 platform, this Jeep JLU 4X4 makes RC crawling easy and affordable. Its detailed ABS hard body, high-performance chassis, and Spektrum electronics provide capabilities and realism never available before in this size.

Replacement left and right caster blocks for the Extreme Heavy Duty Upgrade Kit with 3x32 hinge pins (2) and 3x20 screws (2). (Caster blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts)

Replacement left and right caster blocks for the Extreme Heavy Duty Upgrade Kit with 3x32 hinge pins (2) and 3x20 screws (2). (Caster blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts)

Replacement left and right caster blocks for the Extreme Heavy Duty Upgrade Kit with 3x32 hinge pins (2) and 3x20 screws (2).

Replacement left and right caster blocks for the Extreme Heavy Duty Upgrade Kit with 3x32 hinge pins (2) and 3x20 screws (2). (Caster blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts).

Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit).

Bearing adapter, 6061-T6 aluminum (orange-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft).

Heavy-duty Maxx® Slash® lower suspension arms are formed from our toughest composite material for high loads and hard landings.

Pair of 24 mm splined wheel hex hubs with hex clips (2).

Give your mini the ultimate suspension upgrade with aluminum GTR shocks.