Traxxas 741544BLUE - 1/10 Ford Fiesta ST Rally - Blue
The Traxxas Ford® Fiesta® ST Rally dominates the track with agile handling and superior AWD traction. Rally’s officially licensed clipless body and high-grip gravel tires offer the full rally racing experience. Rally’s new BL-2s™ brushless power system delivers effortless high-speed power with an added boost of torque for powerful acceleration. Additionally, Fiesta ST Rally now comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit for game-changing strength and durability.
Features:
- Officially licensed Ford® Fiesta® ST body
- Pre-painted with applied decals
- Tough composite rear wing
- High approach angle front bumper
- Internal reinforcement with integrated nerf bars
- Holds tight for intense action
- Quick and easy removal
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- BL-2s™ Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set® one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- Chassis-mounted 2056 servo
- Dual bellcrank design with integrated servo saver
- Modular composite tub design
- Secure battery hold-down latch
- Low-CG design
- High-angle bumpers
- Oil-filled Ultra Shocks™
- White powder-coated springs
- Heavy-duty slipper clutch
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch spur gear
- 2″ outer, 3″ inner diameter dual-profile 12-spoke rally wheels
- Pre-glued all-terrain rally tires with performance foam inserts
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Includes:
- Fiesta ST Rally with BL-2s ESC and 3300 kV motor
- Quick Start Guide
- TQ 2.4 GHz radio system
- High quality maintenance tools
Specs:
| Length: |
21.00 inches (535 mm) |
| Front Track: |
11.00 inches (281 mm) |
| Rear Track: |
11.00 inches (281 mm) |
| Ground Clearance: |
0.80 inches (21 mm) |
| Weight (no battery): |
5.8 pounds (2.63 kg) |
| Height (overall): |
8.10 inches (206 mm) |
| Wheelbase: |
12.8 inches (324 mm) |
| Shock Length (front): |
3.45 inches (88 mm) - Long |
| Shock Length (rear): |
3.98 inches (101 mm) - XX-long |
| Speed Control: |
BL-2s™ electronic speed control |
| Motor (electric): |
BL-2s™ 3300 kV sensorless brushless |
| Overall Drive Ratio: |
11.82:1 |
| Differential Type: |
Hardened steel bevel, sealed, limited slip |
| Gear Pitch: |
32 pitch |
| Chassis Structure/Material: |
Composite tub |
| Drive System: |
Shaft-driven 4WD |
| Steering: |
Dual-bellcrank with integrated servo saver |
| Tires: |
Gravel pattern directional with foam inserts |
| Tire Diameter: |
3.0 inches (76 mm) (front and rear) |
| Wheels (front/rear): |
12-spoke rally wheels |
| Wheel Diameter: |
2.2″ (56 mm) (outer), 3.0″ (76 mm) (inner) |
| Radio System: |
TQ™ 2.4 GHz (2-channel) |
| Servo: |
Waterproof digital 2056 servo (80 oz-in torque) |
| Skill Level: |
1 |
| Battery Compartment (L/W/H): |
165 x 50 x 23/26 mm |
| Required Batteries: |
4 “AA” (transmitter), Vehicle (see battery finder) |
