Tamiya 58600 - 1/10 RC TT-02 Type S Chassis Kit
This sporty evolution of the TT-02 chassis sees the efficient shaft-driven 4WD unit given newly-designed parts and gives users the ability to make setup adjustments across the board, making it great for racing! It is equipped with long reversible suspension arms, and rigid metal suspension mounts. The rear is set up with 3°of toe-in. CVA oil dampers are attached to specially-designed 3.0mm thick FRP damper stays, with optimum damper angle and rebound stroke providing excellent road holding. Turnbuckle upper arms and steering linkage allow fuss-free adjustment of camber and front toe. Power loss is minimized by the use of full ball bearings and metal cup joints and drive shafts.
Features:
- 3mm thick Front/Rear FRP Damper Stays (NEW part)
- Metal Suspension Mounts (NEW part)
- Item 51297 Reversible Suspension Arms (Long)
- CVA Oil Shocks
- Turnbuckle Shaft Front/Rear Upper Arms
- Turnbuckle Shaft Steering Tie-Rods
- Type 540 Torque Tuned Motor
- Item 51023 Medium-Narrow Racing Radial Tires
- Metal Cup Joints Metal Drive Shafts
- Die Cast Aluminum Hex Wheel Hubs
- Reversible Suspension Arms
- CVA Oil Shocks
- FRP Front & Rear Damper Stays (newly-designed)
- Metal Suspension Mounts (w/3°rear toe-in)
- Metal Wheel Axles, Gearbox Joints & Drive Shafts
- Full Ball Bearings
- Turnbuckle Upper Arms & Steering Linkag
- Die-Cast Metal Hex Wheel Hubs
Specs:
Adjustable Gear Ratio: Yes
Bearings: Shielded ball bearing
Chassis Material: ABS Plastic
Chassis Type: TT-02 Type S
Construction Type: Assembly kit
Differential Type: Gear
Drive Type: 4WD
Electronic Speed Control (esc): Not Included
Led Light Buckets: No
Motor: 540-brushed type
Required To Complete: 2-channel radio, steering servo, ESC, 7.2-7.4volt battery & battery charger, Tamiya 190mm touring car body set, and Tamiya PS paint.
Scale: 1/10
Shock Damper: Oil-filled damper
Special Feature 1: Item 51297 Reversible Suspension Arms (Long)
Special Feature 2: 3mm thick Front/Rear FRP Damper Stays
Special Feature 3: Type 540 Torque Tuned Motor
Special Feature 4: Metal Cup Joints Metal Drive Shafts
Special Feature 5: Die Cast Aluminum Hex Wheel Hubs
Special Feature 6: Turnbuckle Shaft Front/Rear Upper Arms
Special Feature 7: Item 51023 Medium-Narrow Racing Radial Tires
Special Feature 8: Rear toe-in is set to 3 degrees.
Special Feature 9: Metal Suspension Mounts
Special Feature 10: Torque Tuned Motor
Suspension: Fully independent double wishbone
Terrain Use: On-Road
