INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

SUPER-GOLD™ is non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+.

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.

IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces.

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams.

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins.

Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.

For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time.

Two foot length of tubing can be cut off to any length (usually 2").

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency.

This non-staining, fine, white PTFE lubricant contains an additive that clings to smooth surfaces.

Incredibly tough & versatile, Gorilla Hot Glue Sticks provide a long term hold even on hard to bond surfaces.

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula.

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula.

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility.

Gorilla Tough & Clear Mounting Tape is perfect for indoor and outdoor projects and sticks to smooth and rough surfaces.

Lead-free Stick-on Weights allow you to cut off excess weight as needed, easily. Use included double-sided tape to attach to side of car as part of design.

Use with axle holes or slots to ensure accurate wheel spacing and axle nail alignment.

For perfectly aligned axle slots. Correct flaws in existing axle slots or drill new ones.

Low profile and aerodynamic, the Stealth is geared toward speed. PineCar round and cylinder weights fit the pre-drilled weight cavities.

Ready-to-go, no woodworking tools required. The Wedge comes with pre-drilled axle slots. Just sand, paint and decorate.