Associated ASC90041 - RC10B7 Team Kit

Associated ASC90041 - RC10B7 Team Kit

Starting with the original RC10, Team Associated has been at the leading edge of 1:10 scale 2WD off road for the last 40 years and are proud to introduce this next generation RC10 to the world—the RC10B7. 40 years has seen a lot of development and changes, with each generation being a step forward from the last. The RC10B7 is no exception, boasting new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall easier-to-drive feel than the previous generation.

The RC10B7 is the recommended starting kit for those who plan to race on carpet, AstroTurf®, and some high-grip sealed clay tracks. This kit comes equipped with an all-new gear differential, front and rear anti-roll bars, and an optimized high-grip setup which includes stiffer springs and higher pack shock pistons. As with previous generations, the RC10B7 and RC10B7D feature fully interchangeable parts between the two kits, which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion that is found in any Team Associated race platform.

Features:

5-gear laydown transmission with low profile motor mount moves weight of motor closer to the center of the car
Long-arm suspension geometry improves grip and predictability in all conditions
KPI adjustable steering and caster blocks allows for fine tuning steering feel. Three options are included in kit
Vertical front outer ballstud allows fine tuning of roll center, camber gain, and link length
Height adjustable aluminum front bulkhead allows for further tuning of front roll center
Standard and HRC (High Roll Center) rear hubs included
Easy access anti-roll bars front and rear
High volume gear differential improves consistency of differential action over a longer runs. Fits LTC internal diff gears from the RC10B74.2
Highly adjustable battery holder with thumb tabs allows for easy battery removal and fine tuning of weight bias
7075-T6 aluminum chassis with increased departure angle and optional weight plate pockets
6.5mm aluminum front axle increases stability and grip when using slim front wheels and low profile tires
HD 69mm CVA bones and differential outdrives for improved durability
Lightweight molded servo mount
One-piece rear wing mount improves durability
New 7-inch rear wing and 2.5-inch front wing
Low-profile body
Shock tower covers front and rear
3.5mm turnbuckles and ballcups

Includes:

(1) 1/10 RC10B7 2WD Buggy Team Kit

Needed To Complete:

(1) 540-Size Motor
(1) Electronic Speed Control
(1) 7.4V - 7.6V Shorty Battery
(1) Battery Charger
(1) 2+ Channel Radio System
(1) 1/10 Buggy Body
(1) Standard-Size Servo
(4) 1/10 Off-Road Tires and Wheels

Specs:

Speed Control	Sold Separately
Product Weight	Varies
Vehicle Type	Buggy
Body	Sold Separately
Scale	1/10
Battery	Sold Separately
Internal Gear Ratio	2.60:1
Product Length	15.35" (390 mm)
Ball Bearings	Full Ball Bearings
Completion Level	Kit
Drivetrain	2WD
Vehicle Size	Standard
Product Width	Varies
Radio	Sold Separately
Charger	Sold Separately
Differential	Gear Differentials
Receiver	Sold Separately
Shock Type	Oil-Filled Shocks
Power Type	Electric
Servos	Sold Separately

1/10 / 2WD / Buggy Kit / Team Kit